OUR STORE Jalan Pintu Air Raya No.11 B-C Jakarta (10710), Indonesia
OUR STORE
Jalan Pintu Air Raya No.11 B-C Jakarta (10710), Indonesia
CONTACT US Phone : 0213500703 WA : 0818434301
CONTACT US
Phone : (021) 3500703
WA : 0818434301
OPENING HOURS Mon – Sat : 8:30 AM – 6 PM Sunday : 10 AM – 5 PM
OPENING HOURS
Mon – Sat : 8.30 AM – 6 PM Sunday : 10 AM – 5 PM
Afri
Asia Golf Store Toko Golf Online Terlengkap di Jakarta, Bandung, Surabaya, Indonesia. Jual peralatan golf, stik golf, tas, baju, celana, topi & sepatu golf. Dapatkan Harga Spesial.
The KK Series Wedge utilizes a specially ground 5 cut sole design that helps all types of players make cleaner entry and exit from a wide variety of turf conditions.
Made using the same Arakenma + Kurozome finish golfers can now expect one of the most rewarding sensations at impact of any wedge on the market today.
Our easiest to hit MAVRIK Driver with two interchangeable weights for a MAX forgiveness or a MAX draw configuration.
PRODUCT SUMMARY
New A.I. designed Flash Face SS20 for Ball Speeds All Across The Face MAVRIK thinking fueled our new, A.I. designed Flash Face SS20, to promote fast ball speeds across a more expansive area in each model and loft.
High-strength FS2S Titanium for Consistent Performance New face architecture required FS2S titanium, an extremely strong material that’s 6 grams lighter than traditional titanium to promote optimal speed, forgiveness, and spin robustness.
Jailbreak + T2C Triaxial Carbon Crown for Ball Speed and Forgiveness Two internal Jailbreak bars connect the sole and crown to promote fast ball speed, and the significantly lighter carbon crown allows us to redistribute weight for higher MOI.
Interchangeable Weights to Fine Tune Ball Flight Two interchangeable weights (14g and 2g) positioned in the sole near the heel and rear. Place 14g in the rear for MAX forgiveness or in the heel for MAX draw.
Our fastest driver featuring an all-new Cyclone Aero shape for reduced drag.
PRODUCT SUMMARY
Fast Ball Speeds All Across The Face Carbon fiber crown.MAVRIK thinking fueled our new, A.I. designed Flash Face SS20, to promote fast ball speeds across a more expansive area in each model and loft.
Consistent Performance New face architecture required FS2S titanium, an extremely strong material that’s 6 grams lighter than traditional titanium to promote optimal speed, forgiveness, and spin robustness.
Ball Speed And Forgiveness Two internal Jailbreak bars connect the sole and crown to promote fast ball speed, and the significantly lighter carbon crown allows us to redistribute weight for higher MOI.
New Cyclone Aero Shape All-new head shape enhances aerodynamics to reduce drag for fast head speed.
“The 2020 BB Series features four classic shapes with tighter milled radiuses and contours that setup perfectly at address. Tour grade components in the shaft and new Lamkin Sink Fit grip complement each BB Series putter and completely new look with our durable Glacier Black finish and signature red, white, and blue paint scheme.”
PRODUCT SUMMARY
SOFT CARBON STEEL All BB Series production model putters are milled from a proprietary blend of Soft Carbon Steel. Because we machine all of our putters in our own manufacturing facility, we only choose the finest blends of steel that allow for exceptional machinability, and an unforgettable feel at impact when the putter is finished.
SLEEK, COMPACT, FACE BALANCED, 100% PRECISION-MILLED FROM ONE-PIECE Milled to 350 grams from the finest Soft Carbon Steel, the Super-Fly Mill face milling produces a responsive feel at impact for the player looking for both consistent speed and feel. The all-new Glacier Black finish offers a traditional black appearance for improved optics on the greens, and is completed in our signature red, white, and blue paint scheme to add a true performance look. The BB45 putter comes with a plush black honeycomb pattern headcover and our all-new Sinkfit Technology Pistol grip available in standard or jumbo sizes.
INTRODUCING 2020 BB45 PUTTER “The 2020 BB Series features four classic shapes with tighter milled radiuses and contours that setup perfectly at address.Tour grade components
INTRODUCING 2020 BB1 FLOW PUTTER “The 2020 BB Series features four classic shapes with tighter milled radiuses and contours that setup perfectly at address.Tour grade
INTRODUCING 2020 BB1 PUTTER “The 2020 BB Series features four classic shapes with tighter milled radiuses and contours that setup perfectly at address.Tour grade components
“Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia) style putter. By precision-milling the face from American 303 Stainless Steel, and adding a 6061 aluminum rear piece, we were able to craft the best feeling MOI putter to date, which offers optimal weight distribution for greater stability and added forgiveness.”
PRODUCT SUMMARY
DESCRIPTION The all-new INOVAI 6.0 was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia) style putter. By precision-milling the face from American 303 Stainless Steel, and adding a 6061 aluminum rear piece, we were able to craft the best feeling MOI putter to date that offers optimal weight distribution for greater stability and added forgiveness. Our trademark crescent milled neck and Major-winning F.I.T. Face milling complement the bi-metal construction, and newly sculpted contours starting at the edge of the face, extending through the shoulders and across the flanges for a sleek, high-tech alignment guide.
Precisely milled to 358 grams and finished in a two-tone Platinum and new Cobalt Blue appearance, the 6.0 offers golfers complementary visual cues framing the ball perfectly at address.Based completely on Tour feedback to offer a more solid feeling MOI putter without using any inserts, the INOVAI 6.0 was instantly put into play by multiple Bettinardi staffers on Tour.
NEW FINISH & TECHNOLOGY O
Our all-new anodized Cobalt Blue finish on the 6061 aluminum body was chosen to complement the Platinum finished 303 Stainless Steel Face. The two-tone look creates a clean appearance starting from the leading edge of the face, aimed at enhancing alignment with a single dark blue sightline on the topline and two milled white sightlines extending through the flange to perfectly frame the ball at address. Completed in our signature red, white, and blue paint scheme, the all-new INOVAI 6.0 was designed to give players a performance look that provides the ultimate in confidence and feel on the greens.
The INOVAI 6.0 comes paired with our all-new custom Tour-grade putter shaft that provides added stability and stiffer structure to promote a constant weight throughout the player’s swing arc. Expanding on performance, the INOVAI Series putters will come with a custom Lamkin SINKFit putter grip for a comfortable, contoured shape that promotes proper wrist alignment for a more controlled, consistent putting stroke in all weather conditions. Offered in both standard and jumbo.
INTRODUCING The all-new INOVAI 6.0 CTR “Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia)
INTRODUCING The all-new INOVAI 6.0 S “Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia)
INTRODUCING MOI WITH FEEL. THE NEW INOVAI 6.0 “The INOVAI 6.0 was engineered to promote greater feel benefits while still retaining high M.O.I. numbers. By
“Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia) style putter. By precision-milling the face from American 303 Stainless Steel, and adding a 6061 aluminum rear piece, we were able to craft the best feeling MOI putter to date, which offers optimal weight distribution for greater stability and added forgiveness.”
PRODUCT SUMMARY
DESCRIPTION The INOVAI 6.0 Center Shaft was engineered and crafted to offer a high performing MOI mallet for the player with a straight-back-straight-through putting stroke. Robert precisely engineered his one-piece 303 Stainless Steel Face without offset, and to ensure maximum visuals from the straight shaft appearance.
Designed, engineered, and crafted by a center shaft player, Robert Bettinardi himself, the face-balanced INOVAI 6.0 is precision-milled to 358 grams and features our Major-winning F.I.T. Face over Super-Fly Mill face milling for a super soft and responsive feel at impact. Masterfully blends our patented bi-metal construction of 303SS with a 6061 Military Grade Aluminum body with a sleek new appearance that frames the ball perfectly at address. Are you ready to take your putting performance to the next level?
NEW FINISH & TECHNOLOGY Our all-new anodized Cobalt Blue finish on the 6061 aluminum body was chosen to complement the Platinum finished 303 Stainless Steel Face. The two-tone look creates a clean appearance starting from the leading edge of the face, aimed at enhancing alignment with a single dark blue sightline on the topline and two milled white sightlines extending through the flange to perfectly frame the ball at address. Completed in our signature red, white, and blue paint scheme, the all-new INOVAI 6.0 was designed to give players a performance look that provides the ultimate in confidence and feel on the greens.
The INOVAI 6.0 CTR comes paired with our all-new custom Tour-grade putter shaft that provides added stability and stiffer structure to promote a constant weight throughout the player’s swing arc. Expanding on performance, the INOVAI Series putters will come with a custom Lamkin SINKFit putter grip for a comfortable, contoured shape that promotes proper wrist alignment for a more controlled, consistent putting stroke in all weather conditions. Offered in both standard and jumbo.
INTRODUCING The all-new INOVAI 6.0 CTR “Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia)
INTRODUCING The all-new INOVAI 6.0 S “Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia)
INTRODUCING MOI WITH FEEL. THE NEW INOVAI 6.0 “The INOVAI 6.0 was engineered to promote greater feel benefits while still retaining high M.O.I. numbers. By
“The 2020 BB Series features four classic shapes with tighter milled radiuses and contours that setup perfectly at address. Tour grade components in the shaft and new Lamkin Sink Fit grip complement each BB Series putter and completely new look with our durable Glacier Black finish and signature red, white, and blue paint scheme.”
PRODUCT SUMMARY
SOFT CARBON STEEL All BB Series production model putters are milled from a proprietary blend of Soft Carbon Steel. Because we machine all of our putters in our own manufacturing facility, we only choose the finest blends of steel that allow for exceptional machinability, and an unforgettable feel at impact when the putter is finished.
NEW FINISH & TECHNOLOGY Our all-new Glacier Black finish is complemented with a sharp red, white, and blue paint scheme, reducing glare and improving aim optics. The BB Series putters are paired with a new Tour grade putter shaft, tested and engineered to provide the player with added stability through a stiffer structure and constant weight, which maximizes the performance through the complete swing arc. Extending performance features, the BB Series will be paired with Lamkin’s new SINKFit putter grip, offering a more contoured shape to promote proper wrist alignment for a more controlled, consistent putting stroke. The SINKFit grip is offered in both standard and jumbo sizes.
“The 2020 BB Series features four classic shapes with tighter milled radiuses and contours that setup perfectly at address. Tour grade components in the shaft and new Lamkin Sink Fit grip complement each BB Series putter and completely new look with our durable Glacier Black finish and signature red, white, and blue paint scheme.”
PRODUCT SUMMARY
TRADITIONAL BLADE. RESPONSIVE FEEL. 100% PRECISION-MILLED FROME ONE-PIECE. Starting with moving the plumber’s neck slightly back to offer more of a traditional appearance and moderate toe hang.
PRECISELY MILLED TO 350 GRAMS From the finest Soft Carbon Steel, the Super-Fly face milling produces a responsive feel at impact for the player looking for both consistent speed and feel.
THE ALL-NEW GLACIER BLACK FINISH Offers a traditional black appearance for improved optics on the greens and was completed in our signature red, white, and blue paint scheme to add a true performance look.
SOFT CARBON STEEL All BB Series production model putters are milled from a proprietary blend of Soft Carbon Steel.
NEW FINISH & TECHNOLOGY The BB Series putters are paired with a new Tour grade putter shaft, tested and engineered to provide the player with added stability through a stiffer structure and constant weight, which maximizes the performance through the complete swing arc.
INTRODUCING 2020 BB1 FLOW PUTTER “The 2020 BB Series features four classic shapes with tighter milled radiuses and contours that setup perfectly at address.Tour grade
INTRODUCING The all-new INOVAI 6.0 S “Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia)
INTRODUCING MOI WITH FEEL. THE NEW INOVAI 6.0 “The INOVAI 6.0 was engineered to promote greater feel benefits while still retaining high M.O.I. numbers. By
“Was completely re-engineered by Sam Bettinardi to promote newfound performance and feel benefits in an M.O.I. (moment of inertia) style putter. By precision-milling the face from American 303 Stainless Steel, and adding a 6061 aluminum rear piece, we were able to craft the best feeling MOI putter to date, which offers optimal weight distribution for greater stability and added forgiveness.”
PRODUCT SUMMARY
NEW FINISH & TECHNOLOGY The INOVAI 6.0 comes paired with our all-new custom Tour-grade putter shaft that provides added stability and stiffer structure to promote a constant weight throughout the player’s swing arc.
EXPANDING ON PERFORMANCE The INOVAI Series putters will come with a custom Lamkin SINKFit putter grip for a comfortable, contoured shape that promotes proper wrist alignment for a more controlled, consistent putting stroke in all weather conditions.
COMPLETED IN OUR SIGNATURE RED, WHITE, AND BLUE PAINT SCHEME The all-new INOVAI 6.0 was designed to give players a performance look that provides the ultimate in confidence and feel on the greens.
“The INOVAI 6.0 was engineered to promote greater feel benefits while still retaining high M.O.I. numbers. By reversing the 303 Stainless Steel rear piece to the front contact area, and using the 6061 Military Grade Aluminum cutout to act as key alignment guides, The INOVAI 6.0 feels and swings better than ever.”
PRODUCT SUMMARY
A LIGHTWEIGHT CROWN DESIGN Carbon fiber crown.Carbon fiber creates 10 grams of discretionary weight to move the center of gravity lower and deeper.
BETTER TURF INTERACTION Baffler Rail.Saffler Rails improve turf interaction by allowing the club to glide effortlessly through tight lies, thick rough, and even bunkers.
PRECISION MILLED FOR SPEED CNC Milled face.CNC milling is up to 5 times more precise than hand polishing, and is used to ensure that every face is right up to the legal limit.
HIGH-SPEED RAILS Hollow Split Rails.Hollow rails flex more than solid rails, creating a 70% larger hot spot area from heel to toe for higher launch and more ball speed.